orangeben
03-01-2005, 10:02 PM
Does anyone know how to access the service mode on the CT30WX54? Thanks.
 |
|
|||||||||||||
View Full Version : Panny CT30WX54 Service Menu
orangeben
03-20-2005, 03:08 PM
..... bump
BruZZi
03-21-2005, 11:55 PM
Try This:
In SET-UP icon, set antenna to CABLE
In TIMER icon, set sleep timer to 30
Exit menus and tune to channel 124
Adjust volume to 0
Press volume down (VD) on control panel and red 'CHK' will appear in the upper left corner.
Use the Power button on the remote to switch between these modes
Press the power button on the TV to exit the Service Mode
.
In SET-UP icon, set antenna to CABLE
In TIMER icon, set sleep timer to 30
Exit menus and tune to channel 124
Adjust volume to 0
Press volume down (VD) on control panel and red 'CHK' will appear in the upper left corner.
Use the Power button on the remote to switch between these modes
Press the power button on the TV to exit the Service Mode
.
soze
03-22-2005, 12:16 AM
this is easier - try this
Below is how you enter the Service Menu for the Tau CT34WX50 or similar
Press and hold the VOL DOWN button on the tv set (not the remote)
Quickly the INFO/RECALL button three times
Below is how you enter the Service Menu for the Tau CT34WX50 or similar
Press and hold the VOL DOWN button on the tv set (not the remote)
Quickly the INFO/RECALL button three times
orangeben
03-22-2005, 03:31 AM
Thanks for the replies. Setting sleep timer, using channel 124, and volume down did the trick. Thanks a bunch man. I was able to fix some of my geometry and brightness issues.
I've tried the volume down, recall/info button 3x method but it has never worked for me. Thanks anyway though :)
I've tried the volume down, recall/info button 3x method but it has never worked for me. Thanks anyway though :)
