DISH Network by DishPronto       DIRECTV by RapidSatellite.com    banner35   

PDA

View Full Version : Akai 4294 Problem - newbie


pchak
07-18-2006, 05:56 PM
Hi All! I'm glad I found this forum. I have a 4294, that after almost two years of flawless service is on the fritz. One minute there was a picture, next it was gone. When turning it on, I get a "pop" and that's it. No sound or anything. I left it unplugged for 24 hours to no avail.

When powering down, I get a code form the power light flashing. After doing all the relevant searches (netiquette common on most forums), I couldn't find anything. Does anybody have any idea how I can decipher the codes. I'v had no luck finding a service manual anywhere on the web, and was even thinking about gambling on a Samsung manual, since the tv is supposed to be a SPN4235.

Any assistance would be appreciated.
thanks!

pchak

d6500k
07-18-2006, 09:00 PM
I checked my sources for service manuals


http://www.servicemanuals.net/default.aspx

But they do not list it either.

I agree that the display is a rebadged sammy, but that model is not listed as well. BTB 4325 is the sammy number.

I'd contact the store where you purchased the display to find a servicer in your area. If that fails, contact customer service at the Akai website.

Doug k

d6500k
07-18-2006, 09:08 PM
Found the Sammy manual...


https://www.manualsparadise.com/ShowProductsForModel.do?model=M31429247

Good Viewing,

Doug k

pchak
07-19-2006, 06:02 AM
Doug,
I appreciate your help. I was on the Akai site, and can't believe how little there is on it. I have called a service place. The guy pointed out the code flash (my furnace does the same thing). I also found him listed on the Akai authorized dealer list, so I'll take that as a sign! :)

Thanks again!

kforland
08-26-2006, 04:20 PM
I have the same plasma display, doing the same thing.... Kids where watching it, and suddenly there was no picture.... Don't know if there was a pop as you heard.

What was the end result with your problem? Did you figure out how to fix it?

Doug,
I appreciate your help. I was on the Akai site, and can't believe how little there is on it. I have called a service place. The guy pointed out the code flash (my furnace does the same thing). I also found him listed on the Akai authorized dealer list, so I'll take that as a sign! :)

Thanks again!

Akai_Tech_Rep_Sup
09-01-2006, 09:08 PM
What is the code you get when the lights are flashing and I will tell you whats wrong, what colors are they flashing, etc.

kamranwpi
05-16-2008, 12:17 PM
I have same problem with my plasma Samsung SPN4235, we were watching TV, and all of a sudden there was no picture, but there was sound.

What did any one did?

Please help, Thanks

           


DISH Network by DishPronto       DIRECTV by RapidSatellite.com    banner35       Low Mortgage Rates