jdock
12-21-2008, 01:42 AM
will someone please explain, in simple terms, how to set crossover?
 |
|
|||||||||||||
View Full Version : How do you set a crossover
kevinw
12-21-2008, 08:36 AM
Go into the speaker set up menu of a receiver, follow the directions and adjust the crossover to what is appropriate for the speakers. 80Hz is the norm, although I set mine at 60 hz
http://forum.ecoustics.com/bbs/messages/34579/109297.html
http://forum.ecoustics.com/bbs/messages/34579/109297.html
Ratman
12-21-2008, 10:06 AM
If you don't have a subwoofer, you don't need to set crossover.
If you're asking what's proper specifically for the AM (Bose), in the receiver, set all speakers to "large" and "subwoofer off/none".
If you do have a "real" subwoofer, you have to take into cosideration how low (Hz) the bass module can reproduce a signal. Since Bose doesn't advertise specs, it's hard to say what crossover point you should use. I'd probably start by setting the crossover at (at least) 100Hz. Obviously, you also have to set "subwoofer yes/on" in the receiver.
If you're asking what's proper specifically for the AM (Bose), in the receiver, set all speakers to "large" and "subwoofer off/none".
If you do have a "real" subwoofer, you have to take into cosideration how low (Hz) the bass module can reproduce a signal. Since Bose doesn't advertise specs, it's hard to say what crossover point you should use. I'd probably start by setting the crossover at (at least) 100Hz. Obviously, you also have to set "subwoofer yes/on" in the receiver.
