tstatguy112
04-19-2004, 09:12 PM
How do you attach a coax cable to an antenna on a rotor so it doesnt become wrapped up around the antenna pole when it turns?
Thanks
Thanks
 |
|
|||||||||||||
View Full Version : Attaching Coax Cable to an Antenna on a rotor
LeeS
04-19-2004, 09:17 PM
It has been a very long time since I've used a rotor. I 'believe' that the rotor won't turn a complete 360. There are stops. Just have a small amount of 'slack' in the line.
Someone please correct me if I'm wrong. Kevin?
Lee
Someone please correct me if I'm wrong. Kevin?
Lee
v1rtu0s1ty
04-19-2004, 11:38 PM
tstatguy112,
I just finished mounting my antenna the other day. I have a RS antenna and an RS rotor. The RS rotor can do a 360 degrees full turn, clock wise and counter clockwise. And yes, it does stop. Your won't be able to move your tuner more than 360 clockwise, or else you'll break it. What you'll have to do is rotate it back(counter clockwise). Regard the cable, just estimate enough length for the wire to follow your antenna when it rotates and you should be fine. Hope this helps.
I just finished mounting my antenna the other day. I have a RS antenna and an RS rotor. The RS rotor can do a 360 degrees full turn, clock wise and counter clockwise. And yes, it does stop. Your won't be able to move your tuner more than 360 clockwise, or else you'll break it. What you'll have to do is rotate it back(counter clockwise). Regard the cable, just estimate enough length for the wire to follow your antenna when it rotates and you should be fine. Hope this helps.
