Richie G.

Does anyone have any information in centering the horizontal and vertical position of the screen. I have this unit hooked up to a Pioneer PRO-620 via the RGB cable and the picture is fine in HD albeit a bit out streched (i.e. more than the normal overscan) . I know that the receiver is doing this via the RGB output because it does not happen with the S-Video connection. Any help wouold be appreciated.
Thanks

drjohnc

There's a menu item which will let you change the scan rate of the DTC-100. Try each of the three methods to see which is best for you. In my particular case, I pipe the RGB signal through an Audio Authority converter to Component Video.

drjohnc

There's a menu item which will let you change the scan rate of the DTC-100. Try each of the three methods to see which is best for you. In my particular case, I pipe the RGB signal through an Audio Authority converter to Component Video.

Richie G.

Thanks for the reply. I already tried all the settings and the center setting works best. The problem is that it is not centered horizonally and vertically. Too much overscan from the RGB output. This does not happen on S-Video. It is probably somekind of internal adjustment or software adjustment on the RCA DTC-100 for the RGB output.