HDTVoice.com - High-Definition Television Talk - Advent HT3061A question....

		HDTVoice.com - High-Definition Television Talk > HDTV Sets > Apex / AKAI / Advent HDTV Sets!
Advent HT3061A question....

Mark Forums Read

Reply

Page 1 of 2

1

12-26-2005, 03:44 AM	#1
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	Advent HT306A If anyone has the FULL specs from each menu in the 1080i mode of the service menu please post them here. I dont know how to revert back to the factory, if anyone knows how to do that then that would be even better. Please help me!!

12-26-2005, 04:13 AM	#2
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	Acutally, if anyone has a way to do a FULL revert back to defaults. taht would rock!!!

12-26-2005, 03:24 PM	#3
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	Advent HT3061A color problems What are the settings people have for thier TV? to get to this you have to press the buttons in this order: SLP, Mute, AV, Menu it is menu 4 towards the bottom!! RGB CONTROL 0 RGB CONTROL 1 RGB CONTROL 2 RGB CONTROL 3

12-29-2005, 01:08 AM	#4
marintelecom HDTVoice Member Join Date: Dec 2005 Location: California Posts: 1	Try this and could you tell me how to even enter the seceret service menu again Factory Menu 1: Write R - Oc Write G - 00 Write B - 00 Menu 2: V Size - 18 V Shift - 1a V Linear - 39 V S Corr - 06 H Size - 36 H Shift - 22 V Angle - 05 V Bow - F6 Pin Amp - C6 Pin Phase - Ac Up Corner - 10 Lower Corner - Od Ext Corner - Cc V Sync Cont - 20 Menu 3: V Scroll - 00 V Aspect - 00 V Eht - 00 H Eht - 7e Afc Eht Com - 08 H Blank Time - E2 H Blank Phase - Ed V Blank Start - Ed V Blank End - 5d Min No Of Line - 00 Max No Of Line - Ff Pwm Control - 02 Pll Control 0 - Ob Pll Control 1 - 02 Menu 4: Int H-sync Phase - 10 Av Beam Limit - 1e Av Beam Limit Cha - 91 Pea Drive Limit - 90 Peak Drive Top - 10 Pea Drive Bottom - 47 Pea Drive L-r - 88 Deflect 0 - 03 Deflect 1 - 05 Rgb Control 1 - 84 Rgb Control 2 - Bb Rgb Control 3 - 00 V Input Mode - C5 Menu 5: R-g - 9c G-g - 77 B-g - 72 R-o - 7c G-o - 7f B-o - 7a H-s - 51 V-s - 1b H-size - 3a V-size - 82 Menu 6: Contrast Max - 7f Contrast Cen - 3f Contrast Min - 0c Bright Max - 72 Bright Cen - 50 Bright Min - 35 Color Max - 3f Color Cen - 20 Color Min - 00 Sharp Max - 75 Tint Cen - 00 Menu 7: Volume-1 - 25 Volume-25 - 50 Volume-50 - 60 Volume-100 - 69 Bass Max - 42 Bass Min - Cd Treble Max - 31 Treble Min - D6 Surround Max - 75 Surround Min - 00 Blance Cen - 20 Loudness On - 4f Loudness Off - 00 Menu 8: Osd-hp Menu - 13 Osd-hp Sel - 13 Osd-hp Normal - 12 Svm Delay - 0f Zoom Data - 33 Option Data1 - Ed H-mute Delay - 55 Menu 9: Ic Xxx - Pw1230 Add H - 00 Add L - 00 Data H - 00 Data L - 00 Read - No Refresh - No Save - No

HDTVoice Sponsors

12-31-2005, 04:24 AM	#5
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	to get to that menu you press these buttons on the remote SLP, Mute, AV, Menu press those in that order.

12-31-2005, 04:29 AM	#6
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	its really wierd, for this menu I also have an RGB Control 0 on my TV? Do you know what that is supposed to be at? Menu 4: Int H-sync Phase - 10 Av Beam Limit - 1e Av Beam Limit Cha - 91 Pea Drive Limit - 90 Peak Drive Top - 10 Pea Drive Bottom - 47 Pea Drive L-r - 88 Deflect 0 - 03 Deflect 1 - 05 Rgb Control 1 - 84 Rgb Control 2 - Bb Rgb Control 3 - 00 V Input Mode - C5

12-31-2005, 05:02 AM	#7
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	Anyone have the Service Manual for an Advent TV HT3061A? Please Please Please!!!

02-12-2006, 12:44 AM	#8
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	How do I reset my TV back to its initial settings? I have a Advent HT3061A and I pressed the Mute button and it doesnt do anything. Any other advice? Also, if you can help me. My picture is bowed out on the right side and kind of bounces whenever I select something, Its really wierd. Any Ideas on what to do?

HDTVoice Sponsors

02-12-2006, 01:09 AM	#9
Splicer "Don't taze me bro!!!" Join Date: Jul 2004 Location: Blanchester, Ohio Posts: 2,702	Not really. How old is it? __________________ Toshiba 51H83 CRT RP HDTV \| LG LST3510a ATSC/QAM Receiver \| Toshiba HD-A35 HD DVD \| Denon AVR-789 \| Sony CDP-CX55 CD \| TAD 805C Center Channel \| TAD 803SD Front Mains & Surrounds \| DIY 300w 12" Sub \| APC H15 Power Conditioner \| Harmony 550 \| 43 OTA Channels

02-12-2006, 02:26 AM	#10
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	About 7 months

02-12-2006, 12:23 PM	#11
57U Runner/Cyclist/X-C Skier Join Date: May 2002 Location: Toronto Posts: 17,068	Did you go into the service menu and change the settings? If you did, you should have made note of the initial setting. There are no "resets" to the initial settings, since every TV is unique and comes from the factory with different settings, due to the variability of the components. If there were a reset, then those values may not meet the needs of your particular TV. __________________ 57U - Toronto, Rogers Cable, SA8300HD, 500GB HDD & Hitachi 61UWX10B HDTV, Yamaha RX-V1 A/V Receiver, Martin Logan Speakers. Photos --> 57U's HT SA8300HD, 250GB HDD & KDL40W3000 (Upstairs) Please don't PM me with questions that can (and should) be asked in the forum, thanks. Personal Question? Fire away.

02-13-2006, 12:01 AM	#12
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	Anyone know how to adjust it so that the left side of my TV isnt so bowed out?

HDTVoice Sponsors

02-13-2006, 10:08 PM	#13
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	If I unplug my TV will it reset itself to the original settings... in the service menu?

02-13-2006, 10:13 PM	#14
d6500k www.6500kcalibrations.com Join Date: Apr 2005 Location: Zigzag, Oregon Posts: 393	If you have changed data written to the epprom (non volatile memory), unplugging the display will have no effect. The only way to reset data written in this manner is to reenter the original data from notes taken before changes were made. Good viewing, Doug k __________________ www.6500kcalibrations.com Imaging Science Foundation Technician Serving Oregon, Washington and Idaho With tours to Tampa/St Petersburg twice yearly And Southernmost Texas as well.

02-13-2006, 10:17 PM	#15
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	Well it is this type of stuff: FACTORY MENU 1: WRITE R - OC WRITE G - 00 WRITE B - 00 MENU 2: V SIZE - 18 V SHIFT - 1A V LINEAR - 39 V S CORR - 06 H SIZE - 36 H SHIFT - 22 V ANGLE - 05 V BOW - F6 PIN AMP - C6 PIN PHASE - AC UP CORNER - 10 LOWER CORNER - OD EXT CORNER - CC V SYNC CONT - 20 MENU 3: V SCROLL - 00 V ASPECT - 00 V EHT - 00 H EHT - 7E AFC EHT COM - 08 H BLANK TIME - E2 H BLANK PHASE - ED V BLANK START - ED V BLANK END - 5D MIN NO OF LINE - 00 MAX NO OF LINE - FF PWM CONTROL - 02 PLL CONTROL 0 - OB PLL CONTROL 1 - 02 MENU 4: INT H-SYNC PHASE - 10 AV BEAM LIMIT - 1E AV BEAM LIMIT CHA - 91 PEA DRIVE LIMIT - 90 PEAK DRIVE TOP - 10 PEA DRIVE BOTTOM - 47 PEA DRIVE L-R - 88 DEFLECT 0 - 03 DEFLECT 1 - 05 RGB CONTROL 0 - 84 RGB CONTROL 1 - CE RGB CONTROL 2 - 01 RGB CONTROL 3 - 00 V INPUT MODE - C4 MENU 5: R-G - 9C G-G - 77 B-G - 72 R-O - 7C G-O - 7F B-O - 7A H-S - 51 V-S - 1B H-SIZE - 3A V-SIZE - 82 MENU 6: CONTRAST MAX - 7F CONTRAST CEN - 3F CONTRAST MIN - 0C BRIGHT MAX - 72 BRIGHT CEN - 50 BRIGHT MIN - 35 COLOR MAX - 3F COLOR CEN - 20 COLOR MIN - 00 SHARP MAX - 75 TINT CEN - 00 MENU 7: VOLUME-1 - 25 VOLUME-25 - 50 VOLUME-50 - 60 VOLUME-100 - 69 BASS MAX - 42 BASS MIN - CD TREBLE MAX - 31 TREBLE MIN - D6 SURROUND MAX - 75 SURROUND MIN - 00 BLANCE CEN - 20 LOUDNESS ON - 4F LOUDNESS OFF - 00 MENU 8: OSD-HP MENU - 13 OSD-HP SEL - 13 OSD-HP NORMAL - 12 SVM DELAY - 0F ZOOM DATA - 33 OPTION DATA1 - ED H-MUTE DELAY - 55 MENU 9: IC XXX - PW1230 ADD H - 00 ADD L - 00 DATA H - 00 DATA L - 00 READ - NO REFRESH - NO SAVE - NO I am guessing that this type of stuff wont be fixed if I unplug my tv for like 10 minutes. Also, could you give me an Idea of what some of that stuff does?

02-13-2006, 10:39 PM	#16
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	What does Shop Out Initial mean when I am using the Service Menu? Also, what does this stuff mean: MENU 9: IC XXX - PW1230 ADD H - 00 ADD L - 00 DATA H - 00 DATA L - 00 READ - NO REFRESH - NO SAVE - NO Like if I put Refresh to yes, what will it do?

HDTVoice Sponsors

02-14-2006, 12:24 AM	#17
d6500k www.6500kcalibrations.com Join Date: Apr 2005 Location: Zigzag, Oregon Posts: 393	Without referencing a service tech manual, the codings of service parameters are only a "best guess". If you really want to know, you will need to find a copy of the service manual, or after writing down the initial parameters and settings, change them and observe. It's your TV, but be forewarned, some adjustments will seem to do nothing as they are changing entries for inputs that you may not be viewing when you alter them. To be safe, only adjust service settings with a verified copy of the documentation close at hand. I believe this site may have one for sale.. http://www.tritronicsinc.com/cgi-bi...ink=home_cs.htm Really cheap insurance against getting the wrong data from questionable sources. Good viewing, Doug k __________________ www.6500kcalibrations.com Imaging Science Foundation Technician Serving Oregon, Washington and Idaho With tours to Tampa/St Petersburg twice yearly And Southernmost Texas as well.

02-14-2006, 12:32 AM	#18
d6500k www.6500kcalibrations.com Join Date: Apr 2005 Location: Zigzag, Oregon Posts: 393	MENU 5: R-G - 9C G-G - 77 B-G - 72 R-O - 7C G-O - 7F B-O - 7A H-S - 51 V-S - 1B H-SIZE - 3A V-SIZE - 82 Grayscale and sizing controls MENU 2: V SIZE - 18 V SHIFT - 1A V LINEAR - 39 V S CORR - 06 H SIZE - 36 H SHIFT - 22 V ANGLE - 05 V BOW - F6 PIN AMP - C6 PIN PHASE - AC UP CORNER - 10 LOWER CORNER - OD EXT CORNER - CC V SYNC CONT - 20 Geometry and linearity controls MENU 6: CONTRAST MAX - 7F CONTRAST CEN - 3F CONTRAST MIN - 0C BRIGHT MAX - 72 BRIGHT CEN - 50 BRIGHT MIN - 35 COLOR MAX - 3F COLOR CEN - 20 COLOR MIN - 00 SHARP MAX - 75 TINT CEN - 00 User centering controls (centering the user controls before adjustment, then using service controls to allow for a calibrated centered user position) Is this a DV crt? Doug k __________________ www.6500kcalibrations.com Imaging Science Foundation Technician Serving Oregon, Washington and Idaho With tours to Tampa/St Petersburg twice yearly And Southernmost Texas as well.

02-14-2006, 04:33 PM	#19
AdventUser HDTVoice Member Join Date: Dec 2005 Location: bP Posts: 33	Its a CRT TV if thats what your asking. I dont know what a DV CRT is.

02-14-2006, 05:10 PM	#20
Ratman Try using Google... Fool! Join Date: May 2002 Location: Collingswood, N.J. Posts: 11,102	DV = Direct View (not rear projection) __________________ "Illegitimus non carborundum" *Please! Do not PM me with general questions which can be asked publicly on the forum.*

HDTVoice Sponsors

Reply

Page 1 of 2

1

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is Off HTML code is Off

DISH Network by DishPronto

Get the package that beats cable!

banner35

Once You Know, You Newegg

All times are GMT -5. The time now is 01:38 AM.