![]() |
| |||||||||||||
|
|
#1 |
|
HDTVoice Member
Join Date: Jan 2003
Location: Boston
Posts: 9
|
Newbie questions regarding DVI and PVRs
I'm trying to wrap my mind around this whole DVI/ FireWire issue, and timeshifting with a PVR. I've read many of the posts here and I'd like to ask some questions.
I am about to take delivery on a 38" Loewe Aconda that has one component input and one VGA input for high def signals. I do not currently own a STB or PVR. Is not the issue with DVI that if I currently owned a PVR without a DVI interface that I couldn't record a HD signal, and that if I currently owned a STB without a DVI output then I couldn't hook it up to a HD-PVR? But if I got one of the new combo STB/HD-PVR boxes being announced (Zenith just announced some today at CES) then I could hook that unit up to my Aconda using it's VGA or component output? In other words if I got the right combination of STB and HD-PVR then I would be alright even if my HDTV doesn't have DVI or FireWire? Sorry for the simplistic question. |
|
|
|
|
|
#2 |
|
Runner/Cyclist/X-C Skier
![]() Join Date: May 2002
Location: Toronto
Posts: 17,068
![]() ![]() ![]()
|
A separate HD DVR/PVR needs a firewire input. I'm pretty sure DVI doesn't work as an input for HDDVRs.
Most HDDVRs will have component video outputs for a while, so no DVI is necessary to get the signal to the TV...
__________________
57U - Toronto, Rogers Cable, SA8300HD, 500GB HDD & Hitachi 61UWX10B HDTV, Yamaha RX-V1 A/V Receiver, Martin Logan Speakers. Photos --> 57U's HT SA8300HD, 250GB HDD & KDL40W3000 (Upstairs) Please don't PM me with questions that can (and should) be asked in the forum, thanks. Personal Question? Fire away. Last edited by 57U : 01-10-2003 at 06:27 PM. |
|
|
|
|
|
#3 | ||
|
HDTVoice Member
Join Date: Jan 2003
Location: Boston
Posts: 9
|
Thanks 57U. I guess what I'm driving at is that if one gets a "next-gen" combo box that has an HDTV tuner and a HD recorder built into it together, then does one need to worry about DVI/FireWire at all?
Yes, I understand that if I wanted to record to tape using a DVHS deck then I would need to worry about DVI/FW. I'm not too worried about that. I want to time shift HD programs, not archive them. If the program is any good it'll come out on DVD with cool extras anyway. I just want to be able to timeshift an HD program that airs on Thursday night (that's my drinkin' night!) and watch it, in HD, on Friday, using a "combo box" feeding into my TV using the VGA port. For reference the following is information from Zenith, who just announced some combo boxes. Quote:
Quote:
|
||
|
|
|
|
|
#4 |
|
Runner/Cyclist/X-C Skier
![]() Join Date: May 2002
Location: Toronto
Posts: 17,068
![]() ![]() ![]()
|
The first combo box is designed for use with OTA signals only, so make sure you can receive OTA. There are no concerns about wiring with "combo boxes" since there is an internal connection between the "tuner" and the "recorder".
The same holds true for "combo" satellite and cable boxes about to come out soon. The cable (not sure about satellite) combo boxes would typically need to be rented or purchased from the cable company and activated by them. Cable companies typically do not "activate" equipment that has not been supplied by them. You can't simply buy a STB and hook it up to cable. That's why my previous post talked only about "separate" HD DVRs
__________________
57U - Toronto, Rogers Cable, SA8300HD, 500GB HDD & Hitachi 61UWX10B HDTV, Yamaha RX-V1 A/V Receiver, Martin Logan Speakers. Photos --> 57U's HT SA8300HD, 250GB HDD & KDL40W3000 (Upstairs) Please don't PM me with questions that can (and should) be asked in the forum, thanks. Personal Question? Fire away. |
|
|
|
| HDTVoice Sponsors |
|
|
|
|
#5 |
|
HDTVoice Member
Join Date: Jan 2003
Location: Boston
Posts: 9
|
OK, I get it. I'm in the western part of Boston, Mass. (A few blocks west of Brighton Center if any Bostonians are reading this.) Away from big buildings and in a three story house. I'm sure I'll be able to get OTA.
AT&T Broadband hasn't made any announcements as to whether they'll be doing HD yet. Is the worry that if they do roll out HD that their cable box would have to connect to my TV with DVI? (For HD signal.) |
|
|
|
|
|
#6 |
|
Runner/Cyclist/X-C Skier
![]() Join Date: May 2002
Location: Toronto
Posts: 17,068
![]() ![]() ![]()
|
There has been a lot of concern regarding this issue, however, the component video output from the cable box will send HD signals to your TV. There are a lot of HDTVs out there without DVI. Perhaps in some number of years, new STBs will no longer have component video outputs....
For now, DVI is simply another way of getting signals to the TV. DVI is digital while component video is analogue. Some people have said that DVI is "clearer", but others say they saw no difference.
__________________
57U - Toronto, Rogers Cable, SA8300HD, 500GB HDD & Hitachi 61UWX10B HDTV, Yamaha RX-V1 A/V Receiver, Martin Logan Speakers. Photos --> 57U's HT SA8300HD, 250GB HDD & KDL40W3000 (Upstairs) Please don't PM me with questions that can (and should) be asked in the forum, thanks. Personal Question? Fire away. |
|
|
|
|
|
#7 |
|
Reged User Tier 2
![]() Join Date: Dec 2002
Posts: 65
|
DVI and IEEE-1394 and DVHS
this is a very interesting discussion...I have a samsung 160 which has both dvi and component video output...I see no difference between the signals...now on to dvi and DVI and IEEE-1394 ... if you chose to record hdtv with a dvhs machine the dvi interface seems useless...can you convert from IEEE to DVI?
|
|
|
|
|
|
#8 |
|
HDTVoice Member
Join Date: Jan 2003
Location: Boston
Posts: 9
|
In my stumbling research on the subject I finally came to the answer I was looking for.
At this time my lack of a DVI port will not be a problem, and I could hook up several of the combo HDTV/PVRs that were announced at CES, such as the Zenith or DirecTivo units. But some day down the road the content providers may flip a switch and the only way I'll be able to view the content recorded on the box is in a low-res. On that day I'll be in court filing a lawsuit. Laveller, in my limited research I have not seen such a converter. Perhaps some one will invent one. I get the feeling it would require some computing power, though. |
|
|
|
| HDTVoice Sponsors |
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|