 |
| |||||||||||||
02-20-2003, 08:10 PM
|
#1 |
|
HDTVoice Member
Join Date: Feb 2003
Posts: 2
|
setting timer for JVC DH30000U
I am using the DVCR with a Mits model WS65869 TV. Does anyone know if it is possible to set the DVCR to turn on in order to tape HD coming from the iee1394 port on the TV? I can set the T.V. to send the signals to the DVCR but I have to manually turn on the DVCR or leave it on continuously. Also , when the DVCR is OFF and I am watching DTV, periodically I see messages on the bottom of the screen of; " the DVCR is connected " or the DVCR is disconnected", as is the iee1394 port os seeking the device.
I have taped HD shows and the recordings are great! |
|
|
|
02-24-2003, 12:07 AM
|
#2 |
|
HDTVoice Member
Join Date: Feb 2003
Location: Johnson Creek,WI
Posts: 34
|
normally timer is done through hdtv tuner.set timer through tuner and it automatically turns vcr on.not familiar with mits so that might not help you. are you connect w/1394 or dvi?
|
|
|
|
|
02-25-2003, 03:48 PM
|
#3 |
|
HDTVoice Member
Join Date: Feb 2003
Posts: 2
|
I am connected through iee1394. The record is setup by the T.V. but it will not turn on the DVCR. Apparently the JVC does not support the HAVI system so the Mits will not send a command to it to turn it on. I have worked out most of the conflicts without much help from JVC or Mitsi.
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
Linear Mode
|
|
All times are GMT -5. The time now is 09:30 AM.