jamesgf

I fount this list on the net a while back and thought i would post it for those interested. It is not a complete list, but shows the majority of the codes.

RCUT Red Cutoff
GCUT Green Cutoff
BCUT Blue Cutoff
RDRV Red Drive
BDRV Blue Drive
BRTC Bright Center
COLC Colour Center
TNTC Tint Center
SCOL Sub Center
SCNT Sub Contrast
HPOS Horiz. Image Position
VPOS Vert. Image Position
HIT Height
LIN Vertical Linearty
VSC Vert. S-Correction
VPS Vert. Shift
VCP Vert. Compensation
WID Width
PARA Parabale (Pincushion)
CNR Corner Parabala
HCP Horiz. Compensation
VFC V-F Correct
PHUE POP Hue
PCNT POP Contrast
PCOL POP Colour
ECNT
VCEN Vertical Position
OPT1 Option 1
OPT2 Option 2
TVOP TV Option


-jamie

faheem5

Thank you for posting the descrption, would it be possible to get the default settings as well. I am intrested in the 2004 model settings, as I did the most stupidest thing, while in the service menu, ended up chaning some setting which i have no idea what it effects. I was able to adjust overscan, but i know i scrwed up some numbers. I have the Toshiba 65H84.

57U

Each TV is different and there really are no "default" settings, although the service manual type settings would probably be close enough to get you in the ballpark so you could tweak from there...

__________________
57U - Toronto, Rogers Cable, SA8300HD, 500GB HDD & Panasonic TC-P65S1, Denon AVR4310Ci, Martin Logan Speakers. Photos --> 57U's HT New Equipment & Photos.

SA8300HD, 250GB HDD & KDL40W3000 (Upstairs)

Please don't PM me with questions that can (and should) be asked in the forum, thanks. Personal Question? Fire away.

faheem5

I am confused by your message, or most likely you are confused by mine. So let me clearify. I went in the service menu to adjust overscan. While doing so, i accidently changed some setting for things like RCUT (guessing) which I have no idea what it does. I orginally went into to adjust the height/width of the image, to get a overscan. But changed setting for other things by mistake. So I notice you listed some of the options that can be adjusted, but I am looking for the orginal values. Now if their are no orginal values, like you say, I understand. But I dont understand what you are saying, about manual type settings, because I dotn know what the orginal setting was

57U

There are no "original" values. For the service people or for people like you who've "messed up", there are settings that get you in the ballpark. Sorry, I don't know them.

Perhaps this site can assist.

http://www.epanorama.net/links/servicemanuals.html

Also, you can go to a "friendly" store, go into the service menu of an identical TV, and copy down the settings...

Also, check out the FAQ "What you need to do to your new HDTV".

__________________
57U - Toronto, Rogers Cable, SA8300HD, 500GB HDD & Panasonic TC-P65S1, Denon AVR4310Ci, Martin Logan Speakers. Photos --> 57U's HT New Equipment & Photos.

SA8300HD, 250GB HDD & KDL40W3000 (Upstairs)

Please don't PM me with questions that can (and should) be asked in the forum, thanks. Personal Question? Fire away.

faheem5

yea that is what i figured. If no one was able to jot down the information for me, ill jsut go to where i bought my tv, and copy the numbers there. Only problem store is 50 min from me. But that is my punishment for making that mistake, thank though

BasicBlak

Very kind of you to post this information. Does anyone know the code to access the service menu for a Toshiba, specifically the 52HM94 or -95? That would be extremely helpful...and much appreciated.

__________________
BasicBlak
E* since 5/04 - 211 via HDMI; 522 (dual mode) via S-video
Sony BRAVIA KDS-60A3000 SXRD HDTV (1080p native, 24Hz-compatible)
Winegard Platinum HD8200P UHF antenna
Toshiba HD-A35 1080/24p HD DVD player (v1.3) via HDMI
Sony PS3 40GB Gaming/Blu-ray Disc system via HDMI (v2.35)
Onkyo TX-SR805 THX Ultra2 7.1 receiver (v1.04 w/DSP update)
Carver Cinema 7.1 speaker system
Boston 595x subwoofers

kevinw

Steve Giannoni

1st thing I did when I recently got my 51HC85 Monitor was to record all of the 116 codes and the initial 2 digit hexadecimal values, in a Word document. For interest & entertainment ( LOL! ) :

RCUT 9D
GCUT 80
BCUT 7E
RDRV 22
BDRV 39
BRTX 32
BRTN 32
COLX 7F
COLN 00
TNTX 3D
TNTN 10
SHPT 27
APS 1D
UVTT 46
WCTX 5A
WCTC 35
WCTN 00
RGBB 3F
RGBC 80
SCNT 0D
CNTX 7F
BRTC 89
COLC 5C
CNTC 41
CNTX 01
ABL 08
BS1 5B
R-Y 64
G-Y 56
COLTN A4
COLOR 97
DABL 1C
DCTRN 0C
VSM AD
GAMMA 50
OSD 28
WPL 93
COMP OB
SCP OE
BLUE 21
YGDL 51
OSCT 00
OSBR 00
OSCL FC
OSTT 00
OSSH 00
OSRC FB
OSBC 01
OSRD 09
OSBD FE
MUTT 20
STAT 10
E1CTX 50
E1CTC 33
E1ABL 10
E1DTR 83
E2CTX 4B
E2BRT 3D
E2ABL 10
E2DTR 83
ACBON 08
SHPX 7F
SHPN 00
DCTR1 E3
DCTR2 6B
DCTR3 7B
GAMM0 00
GAMM1 42
GAMM2 52
GAMM3 5E
VSM1 E8
VSM2 90
VSM3 9C
BSON 26
HPOS 4F
OPT1 08
OPT2 80
TVOP 40
HIT 36
LIN 12
VSC 29
VPOS 40
VCP 06
WID 4E
PARA 0F
CNR 10
TRAP 40
HCP 00
VFC 00
CNRT 10
CNRB 10
HSC 10
VCEN 80
CPAR 08
CSAW 08
DVP 08
AGC1 03
AGC2 03
PLLW0 14
PLLW1 03
PLLW2 0F
PLLW3 05
PLLW4 14
PLLW5 04
V01 23
V25 4A
V50 63
V75 70
MODH 20
MODL 91
PRES 24
SCTH 73
SCTL 01
YOF 17
BOF F7
ROF 0C

jonjay

Hi did you ever find your settings? I have a 51H83 Toshiba and have the same problem you have wanted to adjust hieght and width need original values.

Stephen M. Smith

This might help:

videobruce

Dead link

__________________
When not is use, turn off the juice !

Stephen M. Smith

This works: http://www.imagesoftcorp.com/X81Designer.zip

or this: ftp://ftp.imagesoftcorp.com/X81Designer.zip

videobruce

Sheesh.............. Sorry I asked.
How long did all of that take to do?

__________________
When not is use, turn off the juice !

Stephen M. Smith

A long time <g>. But I did all this 5 or so years ago, way back in the heyday of Home Theater Forum when we were figuring out all that kind of stuff.

And then when we finally do get all of it figured out, Toshiba immediately removes the designer menu. *******s. lol

dannyt

Does anyone know where I can find or get the service code to get into a Toshiba 57H83....?